Introduction to Electricity

Electricity holds a vital place in modern society. It is a controllable and convenient form of energy used across homes, schools, hospitals, transport systems, and large-scale industries. From lighting up a simple bulb and running ceiling fans to powering computers, electric trains, and industrial machinery, almost every aspect of contemporary life depends on a steady supply of electrical energy. In NCERT Class 10 Science Chapter 11: Electricity, students transition from basic observations of electrical appliances to understanding the fundamental physics governing how electric charges move through conductors.

This chapter answers several foundational questions: What constitutes electric current? How does electricity flow inside a metallic wire? What keeps charges moving in a closed path? What factors control or regulate the amount of current in a circuit? Finally, why do electrical appliances heat up when current passes through them, and how do we measure the electrical energy we consume every month? Mastering these concepts builds a strong foundation not only for CBSE Class 10 Board Examinations but also for higher secondary physics and competitive entrance tests.

Electric Current and Circuit

Understanding Electric Charge

To understand electric current, we must first understand electric charge. Matter is made up of atoms, which contain positively charged protons, negatively charged electrons, and neutral neutrons. Electric charge is a fundamental physical property of matter that causes it to experience a force when placed in an electromagnetic field. There are two types of charges: positive and negative. Like charges repel each other, while opposite charges attract each other.

The SI unit of electric charge is the coulomb (C). One coulomb is a very large amount of charge; it is approximately equal to the charge contained in \( 6 \times 10^{18} \) electrons. More precisely, a single electron carries a negative charge of magnitude \( e = 1.6 \times 10^{-19} \text{ C} \). Since charge always exists in discrete integer multiples of the elementary charge \( e \), total charge \( Q \) is given by the quantization formula:

\( Q = n \times e \)

Where \( n \) is the number of electrons and \( e = 1.6 \times 10^{-19} \text{ C} \). Using this relation, we can calculate the exact number of electrons constituting 1 coulomb of charge:

\( n = \frac{Q}{e} = \frac{1 \text{ C}}{1.6 \times 10^{-19} \text{ C}} = 6.25 \times 10^{18} \text{ electrons} \)

Definition and Formula of Electric Current

We are familiar with air current (moving air) and water current (flowing water in a river). Similarly, when electric charges flow through a conductor, such as a metallic wire, we say that there is an electric current in the conductor. In metallic conductors, the outer electrons of the atoms are loosely bound and are free to move throughout the metal lattice; these are called free electrons and serve as the charge carriers.

Electric current is formally defined as the rate of flow of electric charges through a given cross-sectional area of a conductor. Alternatively, it is the amount of charge flowing through a particular area in unit time. If a net charge \( Q \) flows across any cross-section of a conductor in time \( t \), then the electric current \( I \) through that cross-section is given by:

\( I = \frac{Q}{t} \)

The SI unit of electric current is the ampere (A), named after the French scientist Andre-Marie Ampere (1775–1836). One ampere is constituted by the flow of one coulomb of charge per second:

\( 1 \text{ A} = \frac{1 \text{ C}}{1 \text{ s}} \)

For measuring smaller currents, smaller units are frequently used in electronics and laboratory experiments:

  • 1 milliampere (1 mA): \( 10^{-3} \text{ A} \)
  • 1 microampere (1 \(\mu\)A): \( 10^{-6} \text{ A} \)

Direction of Electric Current: Historically, before electrons were discovered, electric current was considered to be the flow of positive charges, and the direction of flow of positive charges was taken as the direction of electric current. Even today, by convention, the direction of electric current in an electric circuit is taken as opposite to the direction of the flow of electrons (which are negatively charged). Thus, conventional current flows from the positive terminal of a cell or battery to its negative terminal through the \texternal circuit.

Measuring Electric Current: An instrument called an ammeter is used to measure electric current in a circuit. An ammeter is always connected in series in the circuit through which the current is to be measured so that the entire current passes through it. Ideally, an ammeter has very low resistance so that it does not alter the current it is measuring.

Solved NCERT Example: A current of \( 0.5 \text{ A} \) is drawn by a filament of an electric bulb for 10 minutes. Find the amount of electric charge that flows through the circuit.
Solution: Given, \( I = 0.5 \text{ A} \) and time \( t = 10 \text{ minutes} = 10 \times 60 \text{ s} = 600 \text{ s} \). Using \( Q = I \times t \), we get \( Q = 0.5 \text{ A} \times 600 \text{ s} = 300 \text{ C} \). Therefore, 300 coulombs of charge flow through the filament.

Electric Circuit and Switch

A continuous and closed path of an electric current is called an electric circuit. In a simple torch, a cell provides the energy, a bulb converts electrical energy into light and heat, and a switch controls the flow. A switch creates a conducting link between the cell and the bulb. When the switch is closed (ON position), the circuit is complete and current flows continuously, making the bulb glow. When the switch is open (OFF position) or if a wire breaks anywhere, the circuit becomes incomplete and the current stops immediately.

Electric Potential and Potential Difference

Concept of Electric Potential Difference

What makes electric charges flow inside a copper wire? Charges do not flow through a copper wire by themselves, just as water in a perfectly horizontal tube does not flow on its own. If one end of the tube is connected to a water tank kept at a higher level, a pressure difference is created between the two ends, causing water to flow out of the other end. Similarly, for the flow of charges in a conducting metallic wire, gravity has no role to play; electrons move only if there is a difference of electric pressure—called the potential difference—along the conductor.

This difference of electric potential is produced by a battery consisting of one or more electric cells. Inside a cell, chemical action generates a potential difference across its two terminals, even when no current is drawn from it. When the cell is connected to a conducting circuit element, this potential difference sets the free charges in motion and produces an electric current. To maintain this current in a given electric circuit, the cell has to continuously expend its stored chemical energy.

Formula, SI Unit, and Measurement

We define the electric potential difference between two points in an electric circuit carrying some current as the work done to move a unit charge from one point to the other:

\( \text{Potential difference } (V) = \frac{\text{Work done } (W)}{\text{Charge } (Q)} \)

\( V = \frac{W}{Q} \)

The SI unit of electric potential difference is the volt (V), named after the Italian physicist Alessandro Volta. One volt is the potential difference between two points in a current-carrying conductor when 1 joule of work is done to move a charge of 1 coulomb from one point to the other:

\( 1 \text{ V} = \frac{1 \text{ J}}{1 \text{ C}} = 1 \text{ J C}^{-1} \)

Measuring Potential Difference: The potential difference is measured by means of an instrument called a voltmeter. Unlike an ammeter, a voltmeter is always connected in parallel across the points between which the potential difference is to be measured. A voltmeter has a very high resistance so that it draws negligible current from the main circuit.

Solved NCERT Example: How much work is done in moving a charge of \( 2 \text{ C} \) across two points having a potential difference of \( 12 \text{ V} \)?
Solution: Given, charge \( Q = 2 \text{ C} \) and potential difference \( V = 12 \text{ V} \). Since \( V = \frac{W}{Q} \), the work done is \( W = V \times Q = 12 \text{ V} \times 2 \text{ C} = 24 \text{ J} \). Hence, 24 joules of work is done.

Circuit Diagram and Standard Electrical Symbols

An electric circuit generally comprises a cell or a battery, a plug key, electrical components such as bulbs or resistors, and connecting wires. Drawing realistic pictures of every component is tedious and unclear. Instead, physicists and engineers draw a circuit diagram—a schematic representation in which different components of the circuit are represented by standardized, internationally recognized symbols.

S. No.Electrical ComponentDescription of SymbolFunction in Circuit
1An electric cellOne long thin vertical line (positive terminal) and one shorter, thicker parallel vertical line (negative terminal)Provides a steady potential difference to drive current
2A battery or combination of cellsTwo or more cell symbols connected end-to-end in seriesSupplies higher potential difference than a single cell
3Plug key or switch (open)Two curved brackets facing each other without a central dotBreaks the circuit so no current flows
4Plug key or switch (closed)Two curved brackets with a solid dot in the centreCompletes the circuit allowing current to flow
5A wire jointA horizontal line with a perpendicular line meeting it at a dark dotConnects three or more wires electrically
6Wires crossing without joiningOne straight line with another line arcing over it like a small bridgeShows wires passing over each other without electrical contact
7Electric bulbA small upward loop or a circle containing a coiled filamentConverts electrical energy into light and heat
8A resistor of resistance RA continuous zig-zag lineOpposes or controls the flow of current in the circuit
9Variable resistance or rheostatA zig-zag resistor symbol with a diagonal arrow across it or an arrow pointing to the middleChanges the resistance smoothly to regulate current without changing voltage
10AmmeterA circle containing the letter A with + and - signs on either sideMeasures electric current; connected in series
11VoltmeterA circle containing the letter V with + and - signs on either sideMeasures potential difference; connected in parallel

Ohm's Law

Statement and Mathematical Expression

Is there a mathematical relationship between the potential difference across a conductor and the current flowing through it? In 1827, a German physicist named Georg Simon Ohm discovered this exact relationship, now universally known as Ohm's law.

Statement of Ohm's Law: At constant temperature, the potential difference \( V \) across the ends of a given metallic wire in an electric circuit is directly proportional to the current \( I \) flowing through it. Mathematically:

\( V \propto I \)

Or, \( \frac{V}{I} = \text{constant} = R \)

\( V = I \times R \)

Here, \( R \) is a constant for the given metallic wire at a given temperature and is called its resistance.

Experimental Verification and V-I Graph

In the NCERT laboratory activity to verify Ohm's law, a nichrome wire XY of length approximately 0.5 m is connected in series with an ammeter, a plug key, and initially one cell. A voltmeter is connected in parallel across the nichrome wire XY. When the key is plugged in, the ammeter reading \( I \) and voltmeter reading \( V \) are recorded. Next, two, three, and four cells are connected in series one by one, and the corresponding pairs of \( V \) and \( I \) are noted each time.

When we compute the ratio \( \frac{V}{I} \) for every set of readings, we find that the ratio remains nearly constant. Furthermore, if we plot a graph between the potential difference \( V \) (on the y-axis) and the current \( I \) (on the x-axis), we obtain a straight line passing through the origin (0, 0). This straight-line \( V\text{-}I \) graph proves that \( V \) is directly proportional to \( I \), and the slope of the \( V\text{-}I \) graph gives the resistance \( R \) of the conductor.

Resistance and Its SI Unit

Resistance is the property of a conductor to resist the flow of charges through it. From Ohm's law, \( R = \frac{V}{I} \), which shows that for a fixed potential difference, the current through a resistor is inversely proportional to its resistance. If the resistance is doubled, the current gets halved.

The SI unit of resistance is the ohm, represented by the Greek letter \( \Omega \) (omega). One ohm is defined as the resistance of a conductor if the potential difference across its two ends is 1 V and a current of 1 A flows through it:

\( 1 \text{ } \Omega = \frac{1 \text{ V}}{1 \text{ A}} \)

In many practical circuits, it is necessary to increase or decrease the current without changing the voltage of the source. A component used to regulate current without changing the voltage source is called a variable resistance. In an electric circuit, a device called a rheostat is often used to change the resistance in the circuit.

Based on how strongly different materials oppose electric current, materials are classified into three categories:

  • Good Conductors: Components or materials that offer very low resistance to the flow of electrons (e.g., silver, copper, aluminium).
  • Resistors: Components of a given size that offer an appreciable, controlled resistance (e.g., nichrome, manganin, carbon resistors).
  • Insulators: Materials of the same size that offer \textremely high resistance, practically preventing any current flow (e.g., rubber, glass, dry wood, plastics).

Solved NCERT Example: (a) How much current will an electric bulb draw from a \( 220 \text{ V} \) source, if the resistance of the bulb filament is \( 1200 \text{ } \Omega \)? (b) How much current will an electric heater coil draw from a \( 220 \text{ V} \) source, if the resistance of the heater coil is \( 100 \text{ } \Omega \)?
Solution: (a) Given \( V = 220 \text{ V} \) and \( R = 1200 \text{ } \Omega \). By Ohm's law, \( I = \frac{V}{R} = \frac{220 \text{ V}}{1200 \text{ } \Omega} = 0.18 \text{ A} \). (b) Given \( V = 220 \text{ V} \) and \( R = 100 \text{ } \Omega \). Current \( I = \frac{220 \text{ V}}{100 \text{ } \Omega} = 2.2 \text{ A} \). Notice the wide difference in current drawn by a bulb and a heater connected to the same 220 V supply due to their different resistances.

Factors on Which the Resistance of a Conductor Depends

Length, Cross-sectional Area, and Nature of Material

Through careful experimentation (such as testing nichrome wires of different lengths and thicknesses alongside a copper wire of identical dimensions in an ammeter circuit), we observe that the resistance of a uniform metallic conductor depends on four factors:

  • Length of the conductor (\( l \)): Resistance is directly proportional to its length. Doubling the length doubles the resistance: \( R \propto l \).
  • Area of cross-section (\( A \)): Resistance is inversely proportional to its cross-sectional area. A thicker wire offers less opposition to electron flow than a thin wire of the same length: \( R \propto \frac{1}{A} \).
  • Nature of the material: Different materials have different atomic structures and free-electron densities, resulting in vastly different resistances for identical dimensions.
  • Temperature: For pure metals, resistance increases with an increase in temperature.

Combining the dependencies on length and area of cross-section at a constant temperature gives:

\( R \propto \frac{l}{A} \)

\( R = \rho \frac{l}{A} \)

Electrical Resistivity

In the equation \( R = \rho \frac{l}{A} \), the constant of proportionality \( \rho \) (rho) is called the electrical resistivity of the material of the conductor. Rearranging the formula gives \( \rho = \frac{R \times A}{l} \). If a wire has unit length (\( 1 \text{ m} \)) and unit cross-sectional area (\( 1 \text{ m}^2 \)), its resistance numerically equals its resistivity.

The SI unit of resistivity is ohm-metre (\( \Omega \text{ m} \)). It is a characteristic property of the material itself. Unlike resistance, resistivity does not depend on the length or thickness of the wire; cutting a wire in half changes its resistance, but its resistivity remains exactly the same. However, both resistance and resistivity vary with temperature.

Comparison of Conductors, Alloys, and Insulators

Metals and alloys have very low resistivity in the range of \( 10^{-8} \text{ } \Omega \text{ m} \) to \( 10^{-6} \text{ } \Omega \text{ m} \), making them good conductors of electricity. Insulators like rubber and glass have resistivities of the order of \( 10^{12} \) to \( 10^{17} \text{ } \Omega \text{ m} \).

CategoryMaterialElectrical Resistivity at 20°C (\( \Omega \text{ m} \))
ConductorSilver\( 1.60 \times 10^{-8} \)
ConductorCopper\( 1.62 \times 10^{-8} \)
ConductorAluminium\( 2.63 \times 10^{-8} \)
ConductorTungsten\( 5.20 \times 10^{-8} \)
AlloyManganin (Cu, Mn, Ni)\( 44 \times 10^{-6} \)
AlloyNichrome (Ni, Cr, Mn, Fe)\( 100 \times 10^{-6} \)
InsulatorGlass\( 10^{10} - 10^{14} \)
InsulatorHard rubber\( 10^{13} - 10^{16} \)

Why Alloys Are Used in Heating Devices: The resistivity of an alloy is generally higher than that of its constituent metals. Moreover, alloys do not oxidise (burn) readily at high temperatures. For this reason, alloys like nichrome are commonly used in electrical heating devices such as electric irons and toasters. On the other hand, tungsten is used almost exclusively for filaments of electric bulbs because of its \textremely high melting point (3380°C), whereas copper and aluminium are generally used for electrical transmission lines due to their very low resistivity and cost-effectiveness.

Solved NCERT Example: A wire of given material having length \( l \) and area of cross-section \( A \) has a resistance of \( 4 \text{ } \Omega \). What would be the resistance of another wire of the same material having length \( \frac{l}{2} \) and area of cross-section \( 2A \)?
Solution: For the first wire, \( R_1 = \rho \frac{l}{A} = 4 \text{ } \Omega \). For the second wire of the same material (so resistivity \( \rho \) is unchanged), \( R_2 = \rho \frac{l/2}{2A} = \frac{1}{4} \left( \rho \frac{l}{A} \right) = \frac{1}{4} R_1 = \frac{1}{4} \times 4 \text{ } \Omega = 1 \text{ } \Omega \). Thus, the resistance of the new wire is \( 1 \text{ } \Omega \).

Resistance of a System of Resistors

In real electrical gadgets, multiple resistors are often joined together in various combinations to achieve a desired total resistance or to distribute current and voltage appropriately. There are two primary methods of joining resistors: in series and in parallel.

Resistors in Series

When two or more resistors are joined end-to-end sequentially so that there is only a single path for the current to follow, they are said to be connected in series. Consider three resistors \( R_1, R_2, \) and \( R_3 \) connected in series across a battery of potential difference \( V \). Two key rules apply to a series combination:

  • The same current \( I \) flows through every resistor in the series chain.
  • The total potential difference \( V \) across the combination equals the sum of the potential differences across the individual resistors: \( V = V_1 + V_2 + V_3 \).

Derivation of Equivalent Resistance in Series: Let \( R_s \) be the single equivalent resistor that can replace the three resistors without changing the total current \( I \) drawn from the battery of voltage \( V \). Applying Ohm's law to the entire circuit and to each individual resistor:

\( V = I R_s \)

\( V_1 = I R_1, \quad V_2 = I R_2, \quad V_3 = I R_3 \)

Substituting these into \( V = V_1 + V_2 + V_3 \):

\( I R_s = I R_1 + I R_2 + I R_3 \)

Dividing both sides by \( I \), we obtain:

\( R_s = R_1 + R_2 + R_3 \)

Thus, when several resistors are joined in series, the resistance of the combination equals the sum of their individual resistances and is therefore greater than any individual resistance.

Disadvantages of Series Circuits in Domestic Wiring: It is impractical to connect an electric bulb and an electric heater in series because they require currents of widely different values to operate properly. Furthermore, in a series circuit, if one component fails or is switched off, the entire circuit breaks and none of the other appliances work (like traditional decorative fairy lights).

Solved NCERT Example: An electric lamp whose resistance is \( 20 \text{ } \Omega \) and a conductor of \( 4 \text{ } \Omega \) resistance are connected to a \( 6 \text{ V} \) battery in series. Calculate (a) the total resistance of the circuit, (b) the current through the circuit, and (c) the potential difference across the electric lamp and conductor.
Solution: (a) Total resistance \( R_s = R_1 + R_2 = 20 \text{ } \Omega + 4 \text{ } \Omega = 24 \text{ } \Omega \). (b) Current \( I = \frac{V}{R_s} = \frac{6 \text{ V}}{24 \text{ } \Omega} = 0.25 \text{ A} \). (c) Potential difference across the electric lamp \( V_1 = I R_1 = 0.25 \text{ A} \times 20 \text{ } \Omega = 5 \text{ V} \); across the conductor \( V_2 = I R_2 = 0.25 \text{ A} \times 4 \text{ } \Omega = 1 \text{ V} \). Notice that \( 5 \text{ V} + 1 \text{ V} = 6 \text{ V} \).

Resistors in Parallel

When two or more resistors are connected together between the same two common points, they are said to be connected in parallel. Consider three resistors \( R_1, R_2, \) and \( R_3 \) connected in parallel across a battery of potential difference \( V \). Two key rules apply to a parallel combination:

  • The same potential difference \( V \) exists across each resistor.
  • The total current \( I \) entering the junction splits among the branches and equals the sum of the separate currents through each branch: \( I = I_1 + I_2 + I_3 \).

Derivation of Equivalent Resistance in Parallel: Let \( R_p \) be the equivalent resistance of the parallel combination. By Ohm's law applied to the total circuit and each branch:

\( I = \frac{V}{R_p} \)

\( I_1 = \frac{V}{R_1}, \quad I_2 = \frac{V}{R_2}, \quad I_3 = \frac{V}{R_3} \)

Substituting these into \( I = I_1 + I_2 + I_3 \):

\( \frac{V}{R_p} = \frac{V}{R_1} + \frac{V}{R_2} + \frac{V}{R_3} \)

Dividing both sides by \( V \), we get:

\( \frac