Introduction to Light – Reflection and Refraction
Light is one of the most fascinating and fundamental forms of energy in our universe. It is the invisible agent that makes the world around us visible. When light falls on an object, it bounces off the surface and enters our eyes, allowing our brain to perceive shapes, colours, and motion. Without light, life on Earth would not only be plunged into darkness, but essential biological processes such as photosynthesis would also cease to exist.
In physics, light exhibits an \textraordinary dual nature. Under normal circumstances, light seems to travel in straight lines—a property known as the rectilinear propagation of light. Because the wavelength of visible light is \textremely small (ranging roughly from \(4 \times 10^{-7}\text{ m}\) to \(7 \times 10^{-7}\text{ m}\)), a beam of light casts sharp shadows behind opaque objects. However, when light encounters an opaque obstacle of very small dimensions, it tends to bend around the edges of the obstacle. This phenomenon is called diffraction of light. To explain diffraction, light is treated as an electromagnetic wave, whereas to explain phenomena like the photoelectric effect (interaction of light with matter), light is treated as a stream of particles called photons. In the latest NCERT Class 10 Science syllabus, Chapter 9 focuses primarily on the ray model of light to explore two core optical phenomena: reflection and refraction.
Understanding this chapter is vital for CBSE Class 10 students not only because it carries significant weightage in the Board Examination (typically 7 to 10 marks including numericals and ray diagrams), but also because it forms the bedrock for Ray Optics in Class 12 Physics and real-world optical engineering—from eyeglasses and microscopes to telescopes and fibre-optic communication.
Reflection of Light
When a ray of light travelling through a medium strikes a polished, smooth surface (such as a mirror) and bounces back into the same medium, the phenomenon is called reflection of light. A highly polished surface, such as a silvered glass mirror, reflects most of the light falling on it.
To study reflection geometrically, we define a few standard terms:
- Incident Ray: The ray of light that strikes the reflecting surface.
- Point of Incidence: The exact point on the reflecting surface where the incident ray strikes.
- Reflected Ray: The ray of light that bounces back from the reflecting surface into the same medium.
- Normal: A perpendicular line drawn to the reflecting surface at the point of incidence.
- Angle of Incidence (\(i\)): The angle formed between the incident ray and the normal.
- Angle of Reflection (\(r\)): The angle formed between the reflected ray and the normal.
Laws of Reflection
Regardless of whether the reflecting surface is flat (plane) or curved (spherical), every reflection of light strictly obeys two universal laws:
- First Law of Reflection: The angle of incidence is always equal to the angle of reflection. Mathematically, \(\angle i = \angle r\).
- Second Law of Reflection: The incident ray, the normal to the mirror at the point of incidence, and the reflected ray all lie in the same geometric plane.
Students often assume that the laws of reflection apply only to plane mirrors. In reality, they hold true at every single point on curved mirrors as well, provided the normal is drawn perpendicular to the tangent at the point of incidence.
Image Formation by a Plane Mirror
When you stand in front of a household dressing mirror, you see an image of yourself. An image formed by a plane mirror has four distinct, easily verifiable characteristics:
- Virtual and Erect: The image cannot be captured on a physical screen because the reflected rays only appear to diverge from behind the mirror; it is always upright (erect).
- Same Size: The height of the image is strictly equal to the height of the object (magnification \(m = +1\)).
- Equal Distance: The image is formed as far behind the mirror as the object is placed in front of it.
- Laterally Inverted: The left side of the object appears as the right side of the image and vice versa. This is why the word AMBULANCE is printed in reverse on emergency vehicles, allowing drivers ahead to read it correctly in their rear-view mirrors.
Spherical Mirrors
Not all mirrors are flat. A shiny stainless steel spoon provides a classic everyday demonstration of curved mirrors. If you look into the curved inward side of a spoon, your face appears inverted when held at a distance and magnified when brought close. If you flip the spoon over and look at the bulging outward side, your face appears upright and smaller. Curved mirrors whose reflecting surfaces form part of a hollow sphere of glass are called spherical mirrors.
Concave Mirror and Convex Mirror
Spherical mirrors are classified into two primary types based on which side of the spherical shell is polished to reflect light:
- Concave Mirror: A spherical mirror whose reflecting surface is curved inwards—that is, it faces towards the centre of the sphere—is called a concave mirror. Because it converges parallel rays of light to a single point after reflection, it is also known as a converging mirror.
- Convex Mirror: A spherical mirror whose reflecting surface is curved outwards—away from the centre of the sphere—is called a convex mirror. Because it spreads out (diverges) parallel rays of light after reflection, it is also known as a diverging mirror.
Important Terms Related to Spherical Mirrors
Before drawing ray diagrams or solving mirror numericals, you must master the standard terminology associated with spherical mirrors:
- Pole (\(P\)): The geometric centre of the reflecting surface of a spherical mirror. It lies directly on the surface of the mirror.
- Centre of Curvature (\(C\)): The centre of the hollow sphere of which the reflecting surface of the spherical mirror forms a part. For a concave mirror, \(C\) lies in front of the reflecting surface; for a convex mirror, \(C\) lies behind the reflecting surface.
- Radius of Curvature (\(R\)): The radius of the hollow sphere of which the mirror is a part. Geometrically, it is the distance between the pole \(P\) and the centre of curvature \(C\) (\(PC = R\)).
- Principal Axis: An imaginary straight line passing through the pole \(P\) and the centre of curvature \(C\) of a spherical mirror. It is normal (perpendicular) to the mirror at its pole.
- Principal Focus (\(F\)): When a beam of light rays parallel to the principal axis falls on a concave mirror, the reflected rays actually converge at a specific point on the principal axis. In a convex mirror, the reflected rays appear to diverge from a specific point on the principal axis behind the mirror. This point is the principal focus \(F\).
- Focal Length (\(f\)): The linear distance between the pole \(P\) and the principal focus \(F\) of a spherical mirror (\(PF = f\)).
- Aperture: The diameter of the circular boundary of the reflecting surface of a spherical mirror.
For spherical mirrors of small apertures (where the aperture is much smaller than the radius of curvature), the principal focus \(F\) lies exactly halfway between the pole \(P\) and the centre of curvature \(C\). This gives us a crucial relationship:
\[R = 2f \quad \text{or} \quad f = \frac{R}{2}\]
Image Formation by Spherical Mirrors
To determine the exact position, size, and nature (real or virtual, inverted or erect) of an image formed by a spherical mirror, we trace the intersection of at least two reflected rays originating from the top of the object. A real image is formed when reflected rays actually meet at a point and can be projected onto a screen; a virtual image is formed when reflected rays only appear to meet when \textended backwards and cannot be obtained on a screen.
Rules for Obtaining Images by Spherical Mirrors (Ray Diagrams)
Any two of the following four standard rays can be chosen to construct accurate ray diagrams:
- Rule 1 (Parallel Ray): A ray parallel to the principal axis, after reflection, will pass through the principal focus \(F\) in the case of a concave mirror, or appear to diverge from the principal focus \(F\) in the case of a convex mirror.
- Rule 2 (Ray through Focus): A ray passing through the principal focus \(F\) of a concave mirror (or directed towards the principal focus \(F\) of a convex mirror), after reflection, emerges parallel to the principal axis. This is the exact reverse of Rule 1 due to the principle of reversibility of light.
- Rule 3 (Ray through Centre of Curvature): A ray passing through the centre of curvature \(C\) of a concave mirror (or directed towards \(C\) in a convex mirror) is reflected back along the exact same path. This occurs because any line passing through \(C\) strikes the spherical surface at \(90^\circ\) along the normal, making \(\angle i = 0^\circ\) and therefore \(\angle r = 0^\circ\).
- Rule 4 (Oblique Ray at Pole): A ray incident obliquely at the pole \(P\) making an angle \(i\) with the principal axis is reflected obliquely making an equal angle \(r\) on the opposite side of the principal axis (\(\angle i = \angle r\)).
Image Formation by a Concave Mirror
The nature and size of the image formed by a concave mirror depend entirely on how far the object is placed from the pole \(P\). There are six distinct standard positions studied in NCERT:
- 1. Object at Infinity: Incoming parallel rays converge directly at the principal focus \(F\), forming a real, inverted, and highly diminished (point-sized) image.
- 2. Object Beyond \(C\): A ray parallel to the principal axis passes through \(F\), and a second ray passing through \(C\) retraces its path. They intersect between \(F\) and \(C\), producing a real, inverted, and diminished image.
- 3. Object at \(C\): The reflected rays intersect directly beneath the object at \(C\), creating a real, inverted image of the exact same size as the object.
- 4. Object Between \(C\) and \(F\): As the object moves closer to \(F\), the image moves farther away beyond \(C\) and grows larger. The image is real, inverted, and enlarged.
- 5. Object at \(F\): The reflected rays become completely parallel to each other and meet at infinity. The image is real, inverted, and infinitely large (highly enlarged).
- 6. Object Between \(P\) and \(F\): This is the unique exception for a concave mirror. The reflected rays diverge in front of the mirror, so when \textended backwards, they appear to meet behind the mirror. This forms a virtual, erect, and enlarged image.
| Position of the Object | Position of the Image | Size of the Image | Nature of the Image |
|---|---|---|---|
| At infinity | At the focus \(F\) | Highly diminished, point-sized | Real and inverted |
| Beyond \(C\) | Between \(F\) and \(C\) | Diminished | Real and inverted |
| At \(C\) | At \(C\) | Same size | Real and inverted |
| Between \(C\) and \(F\) | Beyond \(C\) | Enlarged | Real and inverted |
| At \(F\) | At infinity | Highly enlarged | Real and inverted |
| Between \(P\) and \(F\) | Behind the mirror | Enlarged | Virtual and erect |
Uses of Concave Mirrors
The unique image-forming properties of concave mirrors make them indispensable in daily life and technology:
- Torches, Searchlights, and Vehicle Headlights: Placing a powerful bulb at the principal focus \(F\) of a concave reflector produces a powerful parallel beam of light that travels long distances.
- Shaving and Makeup Mirrors: When held close to the face (within the focal length, between \(P\) and \(F\)), a concave mirror forms a magnified, upright image of the face.
- Dentists and ENT Specialists: Dentists use small concave mirrors held close to teeth to inspect enlarged, erect images of cavities.
- Solar Furnaces: Large concave mirrors concentrate parallel rays of sunlight onto a single focal point to generate intense heat for cooking or power generation.
Image Formation by a Convex Mirror
Unlike concave mirrors, a convex mirror always forms a virtual and erect image regardless of where the object is placed in front of it. We study two standard cases:
- 1. Object at Infinity: Parallel rays strike the convex surface and diverge, appearing to originate from the principal focus \(F\) located behind the mirror. The image is virtual, erect, and point-sized.
- 2. Object Between Infinity and Pole \(P\): Rays diverge such that they appear to intersect between the pole \(P\) and the focus \(F\) behind the mirror. The image is always virtual, erect, and diminished.
| Position of the Object | Position of the Image | Size of the Image | Nature of the Image |
|---|---|---|---|
| At infinity | At the focus \(F\), behind the mirror | Highly diminished, point-sized | Virtual and erect |
| Between infinity and pole \(P\) | Between \(P\) and \(F\), behind the mirror | Diminished | Virtual and erect |
Uses of Convex Mirrors
Convex mirrors are universally used as rear-view (wing) mirrors in automobiles. There are two primary scientific reasons for this choice:
- They always form an erect (though diminished) image of the vehicles behind.
- Because they are curved outwards, they provide a much wider field of view than plane mirrors of the same size, enabling the driver to monitor multiple lanes of traffic safely.
Convex mirrors are also installed at sharp blind turns on mountain roads, inside supermarkets as security mirrors, and at ATM kiosks.
Sign Convention, Mirror Formula, and Magnification
To solve numerical problems accurately without ambiguity, physicists use a standardized coordinate system called the New Cartesian Sign Convention.
New Cartesian Sign Convention
In this convention, the pole \(P\) of the mirror is treated as the origin \((0,0)\) of a Cartesian coordinate graph, and the principal axis serves as the X-axis:
- Rule 1: The object is always placed to the left of the mirror, meaning light from the object always strikes the mirror from left to right.
- Rule 2: All distances parallel to the principal axis are measured starting from the pole \(P\).
- Rule 3: Distances measured in the direction of incident light (to the right of \(P\), along \(+X\) axis) are taken as positive.
- Rule 4: Distances measured opposite to the direction of incident light (to the left of \(P\), along \(-X\) axis) are taken as negative.
- Rule 5: Heights measured upwards perpendicular to the principal axis (along \(+Y\) axis) are taken as positive, while heights measured downwards (along \(-Y\) axis) are taken as negative.
From these rules, two vital shortcuts emerge for board exam numericals: the object distance \(u\) is always negative; the focal length \(f\) of a concave mirror is always negative, while the focal length \(f\) of a convex mirror is always positive.
Mirror Formula
The mathematical relationship connecting the object distance (\(u\)), the image distance (\(v\)), and the focal length (\(f\)) of any spherical mirror is known as the Mirror Formula:
\[\frac{1}{v} + \frac{1}{u} = \frac{1}{f}\]
Always substitute the known values with their correct Cartesian signs before solving for the unknown variable.
Magnification Produced by Spherical Mirrors
Magnification (\(m\)) expresses the relative \textent to which the image of an object is magnified compared to the object's original size. It is defined as the ratio of the height of the image (\(h'\)) to the height of the object (\(h\)):
\[m = \frac{\text{Height of the image } (h')}{\text{Height of the object } (h)} = \frac{h'}{h}\]
Magnification is also directly related to the object distance (\(u\)) and image distance (\(v\)) by the formula:
\[m = \frac{h'}{h} = -\frac{v}{u}\]
The numerical sign and magnitude of \(m\) reveal complete information about the image:
- A negative \(m\) indicates that the image is real and inverted.
- A positive \(m\) indicates that the image is virtual and erect.
- If \(|m| > 1\), the image is enlarged; if \(|m| = 1\), it is the same size; if \(|m| < 1\), it is diminished.
Solved Numerical Examples on Mirrors
Example 1 (Concave Mirror): An object \(4.0\text{ cm}\) in size is placed at \(25.0\text{ cm}\) in front of a concave mirror of focal length \(15.0\text{ cm}\). At what distance from the mirror should a screen be placed in order to obtain a sharp image? Find the nature and the size of the image.
Solution: Given: Object height \(h = +4.0\text{ cm}\), object distance \(u = -25.0\text{ cm}\), focal length \(f = -15.0\text{ cm}\) (concave mirror).
Using the mirror formula \(\frac{1}{v} + \frac{1}{u} = \frac{1}{f}\):
\[\frac{1}{v} = \frac{1}{f} - \frac{1}{u} = \frac{1}{-15.0} - \frac{1}{-25.0} = -\frac{1}{15.0} + \frac{1}{25.0} = \frac{-5 + 3}{75.0} = -\frac{2}{75.0}\]
Therefore, \(v = -37.5\text{ cm}\). The screen should be placed at a distance of \(37.5\text{ cm}\) in front of the concave mirror. The negative sign confirms the image is real.
Now, calculating magnification and image height:
\[m = \frac{h'}{h} = -\frac{v}{u} \implies \frac{h'}{4.0} = -\left(\frac{-37.5}{-25.0}\right) = -1.5\]
\[h' = -1.5 \times 4.0 = -6.0\text{ cm}\]
Thus, the image is real, inverted, and enlarged with a height of \(6.0\text{ cm}\).
Example 2 (Convex Mirror): A convex mirror used for rear-view on an automobile has a radius of curvature of \(3.00\text{ m}\). If a bus is located at \(5.00\text{ m}\) from this mirror, find the position, nature, and size of the image.
Solution: Given: Radius of curvature \(R = +3.00\text{ m}\), object distance \(u = -5.00\text{ m}\). Focal length \(f = \frac{R}{2} = +\frac{3.00}{2} = +1.50\text{ m}\).
Using the mirror formula:
\[\frac{1}{v} = \frac{1}{f} - \frac{1}{u} = \frac{1}{1.50} - \frac{1}{-5.00} = \frac{2}{3} + \frac{1}{5} = \frac{10 + 3}{15} = \frac{13}{15}\]
\[v = +\frac{15}{13} \approx +1.15\text{ m}\]
Magnification \(m = -\frac{v}{u} = -\frac{1.15}{-5.00} = +0.23\). Hence, the image is virtual, erect, and smaller in size by a factor of \(0.23\), formed \(1.15\text{ m}\) behind the mirror.
Refraction of Light
Light travels in straight lines only as long as it remains inside a uniform, homogeneous transparent medium. What happens when light passes obliquely from one transparent medium into another, such as from air into water or from air into glass? It changes its direction of propagation at the boundary separating the two media. This bending of light when it enters obliquely from one transparent medium to another is called refraction of light.
Everyday observations vividly illustrate refraction: the bottom of a swimming pool appears raised; a coin placed at the bottom of a bowl of water appears lifted when viewed from the side; a pencil partially immersed in a glass tumbler of water appears bent at the air-water interface; and a lemon kept in water inside a glass tumbler appears bigger than its actual size when viewed from the sides.
Why does light bend at the boundary? The fundamental physical cause of refraction is the change in the speed of light as it moves from one medium to another. Light travels fastest in vacuum (\(c = 3 \times 10^8\text{ m/s}\)) and slows down when entering denser media like water or glass.
Refraction Through a Rectangular Glass Slab
When a ray of light enters a rectangular glass slab obliquely from air, it undergoes refraction twice: once at the top air-glass interface and once at the bottom glass-air interface.
- Air to Glass (Rarer to Denser): As light enters glass from air, its speed decreases, causing the refracted ray to bend towards the normal (\(\angle r < \angle i\)).
- Glass to Air (Denser to Rarer): As the ray exits the opposite parallel face of the glass slab back into air, its speed increases, causing the emergent ray to bend away from the normal.
Because the two opposite faces of the rectangular slab are parallel, the angle of incidence equals the angle of emergence (\(\angle i = \angle e\)). Consequently, the emergent ray travels parallel to the original direction of the incident ray, though it is shifted sideways by a perpendicular distance called lateral displacement.
Laws of Refraction (Snell's Law)
Just like reflection, the refraction of light obeys two fundamental laws:
- First Law of Refraction: The incident ray, the refracted ray, and the normal to the interface of two transparent media at the point of incidence all lie in the same plane.
- Second Law of Refraction (Snell's Law): The ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant, for the light of a given colour and for the given pair of media.
\[\frac{\sin i}{\sin r} = \text{constant} = n_{21}\]
Here, the constant \(n_{21}\) is called the refractive index of the second medium with respect to the first medium.
The Refractive Index
The refractive index quantifies how strongly a transparent medium bends light—or more fundamentally, how much it slows down light compared to another medium. If light travels with speed \(v_1\) in Medium 1 and speed \(v_2\) in Medium 2, the refractive index of Medium 2 with respect to Medium 1 (\(n_{21}\)) is:
\[n_{21} = \frac{\text{Speed of light in Medium 1}}{\text{Speed of light in Medium 2}} = \frac{v_1}{v_2}\]
Conversely, the refractive index of Medium 1 with respect to Medium 2 is \(n_{12} = \frac{v_2}{v_1} = \frac{1}{n_{21}}\).
If Medium 1 is vacuum or air, the refractive index of a medium is called its absolute refractive index (simply denoted as \(n_m\) or \(n\)):
\[n_m = \frac{\text{Speed of light in air or vacuum } (c)}{\text{Speed of light in the medium } (v)} = \frac{c}{v}\]
Note an important distinction highlighted in the NCERT textbook: optical density is not the same as mass density. For example, kerosene has a lower mass density than water (it floats on water), yet its refractive index (\(1.44\)) is higher than that of water (\(1.33\)), making kerosene optically denser than water.
| Material Medium | Absolute Refractive Index (\(n\)) | Material Medium | Absolute Refractive Index (\(n\)) |
|---|---|---|---|
| Air | \(1.0003\) | Kerosene | \(1.44\) |
| Ice | \(1.31\) | Crown Glass | \(1.52\) |
| Water | \(1.33\) | Dense Flint Glass | \(1.65\) |
| Alcohol | \(1.36\) | Diamond | \(2.42\) |
Notice that diamond has the highest refractive index (\(2.42\)) among common transparent substances, meaning the speed of light in diamond drops to \(\frac{1}{2.42}\) times its speed in vacuum.
Refraction by Spherical Lenses
A transparent material bound by two surfaces, of which one or both surfaces are spherical, forms a lens. Lenses are the heart of spectacles, cameras, binoculars, and compound microscopes. In Class 10, we focus on thin spherical lenses bounded by two spherical surfaces:
- Convex Lens (Double Convex Lens): Bulges outwards in the middle and is thinner at the edges. It converges parallel rays of light to a point after refraction and is therefore called a converging lens.
- Concave Lens (Double Concave Lens): Curved inwards in the middle and thicker at the edges. It diverges parallel rays of light away from the principal axis and is therefore called a diverging lens.
Important Terms Related to Spherical Lenses
Because a lens has two spherical surfaces, each surface forms part of a separate sphere, giving a lens two centres of curvature and two foci:
- Centres of Curvature (\(C_1, C_2\)): The centres of the two spheres whose surfaces form the lens.
- Principal Axis: An imaginary straight line passing through the two centres of curvature \(C_1\) and \(C_2\).
- Optical Centre (\(O\)): The central point of a lens. A ray of light passing through the optical centre passes straight through the lens without suffering any deviation.
- Principal Foci (\(F_1, F_2\)): Parallel rays travelling along the principal axis converge at (convex lens) or appear to diverge from (concave lens) a point on the principal axis called the principal focus. Because light can enter from either side, a lens has two principal foci, \(F_1\) and \(F_2\), situated at equal distances from \(O\) on opposite sides. Since \(R = 2f\), the positions of \(C_1\) and \(C_2\) are commonly labelled as \(2F_1\) and \(2F_2\) in lens ray diagrams.
- Focal Length (\(f\)): The distance between the optical centre \(O\) and the principal focus.
- Aperture: The effective diameter of the circular outline of a spherical lens.
Rules for Ray Diagrams in Spherical Lenses
To locate images formed by convex and concave lenses, we use any two of the following three standard rays:
- Rule 1: A ray of light from the object parallel to the principal axis, after refraction from a convex lens, passes through the principal focus \(F_2\) on the other side of the lens. In a concave lens, the ray appears to diverge from the principal focus \(F_1\) located on the same side of the lens.
- Rule 2: A ray of light passing through a principal focus \(F_1\) of a convex lens (or appearing to meet at the principal focus \(F_2\) of a concave lens) emerges parallel to the principal axis after refraction.
- Rule 3: A ray of light passing through the optical centre \(O\) of either a convex or a concave lens emerges without any deviation.
Image Formation by a Convex Lens
Just like a concave mirror, a convex lens forms real and inverted images for all object positions except when the object is placed within its focal length (between \(O\) and \(F_1\)), where it acts as a magnifying glass:
| Position of the Object | Position of the Image | Relative Size of the Image | Nature of the Image |
|---|---|---|---|
| At infinity | At focus \(F_2\) | Highly diminished, point-sized | Real and inverted |
| Beyond \(2F_1\) | Between \(F_2\) and \(2F_2\) | Diminished | Real and inverted |
| At \(2F_1\) | At \(2F_2\) | Same size | Real and inverted |
| Between \(F_1\) and \(2F_1\) | Beyond \(2F_2\) | Enlarged | Real and inverted |
| At focus \(F_1\) | At infinity | Infinitely large / highly enlarged | Real and inverted |
| Between \(F_1\) and optical centre \(O\) | On the same side of the lens as the object | Enlarged | Virtual and erect |
Image Formation by a Concave Lens
Just like a convex mirror, a concave lens always produces a virtual, erect, and diminished image regardless of the object's distance from the lens:
| Position of the Object | Position of the Image | Relative Size of the Image | Nature of the Image |
|---|---|---|---|
| At infinity | At focus \(F_1\) | Highly diminished, point-sized | Virtual and erect |
| Between infinity and optical centre \(O\) | Between focus \(F_1\) and optical centre \(O\) | Diminished | Virtual and erect |
Sign Convention, Lens Formula, Magnification, and Power of a Lens
Sign Convention for Spherical Lenses
The sign convention for spherical lenses is identical to that of spherical mirrors, except that all distances are measured from the optical centre \(O\) instead of the pole \(P\):
- Object distance \(u\) is always negative.
- The focal length \(f\) of a convex lens is positive.
- The focal length \(f\) of a concave lens is negative.
- Real images formed on the opposite side of the lens have a positive \(v\), while virtual images formed on the same side as the object have a negative \(v\).
Lens Formula and Magnification
Be very careful not to confuse the signs in the mirror formula and the lens formula! The Lens Formula has a minus sign between \(\frac{1}{v}\) and \(\frac{1}{u}\):
\[\frac{1}{v} - \frac{1}{u} = \frac{1}{f}\]
Similarly, the formula for magnification produced by a spherical lens has a positive sign in front of \(\frac{v}{u}\):
\[m = \frac{h'}{h} = \frac{v}{u}\]
Remember: for a lens, a negative \(m\) still signifies a real and inverted image (since \(v\) is positive and \(u\) is negative, making \(\frac{v}{u}\) negative), while a positive \(m\) signifies a virtual and erect image.
Power of a Lens
The ability of a lens to converge or diverge light rays depends directly on its focal length. A convex lens of short focal length bends light rays through larger angles, converging them closer to the optical centre. The degree of convergence or divergence of light rays achieved by a lens is expressed in terms of its power (\(P\)). Mathematically, the power of a lens is defined as the reciprocal of its focal length (expressed in metres):
\[P = \frac{1}{f\text{ (in metres)}} = \frac{100}{f\text{ (in cm)}}\]
The SI unit of power of a lens is the dioptre, denoted by the letter \(\text{D}\). One dioptre (\(1\text{ D}\)) is defined as the power of a lens whose focal length is \(1\text{ metre}\) (\(1\text{ D} = 1\text{ m}^{-1}\)).
- The power of a convex lens is positive (e.g., \(+2.0\text{ D}\)).
- The power of a concave lens is negative (e.g., \(-2.5\text{ D}\)).
When multiple thin lenses are placed in contact with each other to form an optical instrument (like camera lenses or optician trial frames), the net power \(P\) of the combination is simply the algebraic sum of the individual powers:
\[P = P_1 + P_2 + P_3 + \dots\]
Solved Numerical Examples on Lenses
Example 3 (Concave Lens): A concave lens has a focal length of \(15\text{ cm}\). At what distance should the object from the lens be placed so that it forms an image at \(10\text{ cm}\) from the lens? Also, find the magnification produced by the lens.
Solution: Since a concave lens always forms a virtual image on the same side as the object, \(v = -10\text{ cm}\), and focal length \(f = -15\text{ cm}\).
Using the lens formula \(\frac{1}{v} - \frac{1}{u} = \frac{1}{f}\):
\[\frac{1}{u} = \frac{1}{v} - \frac{1}{f} = \frac{1}{-10} - \frac{1}{-15} = -\frac{1}{10} + \frac{1}{15} = \frac{-3 + 2}{30} = -\frac{1}{30}\]
Thus, \(u = -30\text{ cm}\). The object should be placed \(30\text{ cm}\) in front of the concave lens.
Magnification \(m = \frac{v}{u} = \frac{-10}{-30} = +\frac{1}{3} \approx +0.33\). The positive sign confirms the image is virtual and erect, and its size is one-third that of the object.
Example 4 (Convex Lens): A \(2.0\text{ cm}\) tall object is placed perpendicular to the principal axis of a convex lens of focal length \(10\text{ cm}\). The distance of the object from the lens is \(15\text{ cm}\). Find the nature, position, and size of the image. Also find its magnification.
Solution: Given: \(h = +2.0\text{ cm}\), \(f = +10\text{ cm}\) (convex lens), \(u = -15\text{ cm}\).
Using the lens formula:
\[\frac{1}{v} = \frac{1}{f} + \frac{1}{u} = \frac{1}{10} + \frac{1}{-15} = \frac{3 - 2}{30} = +\frac{1}{30}\]
Thus, \(v = +30\text{ cm}\). The positive sign shows the image is formed at \(30\text{ cm}\) on the other side of the optical centre, meaning it is real and inverted.
Magnification \(m = \frac{v}{u} = \frac{+30}{-15} = -2\). Image height \(h' = m \times h = -2 \times 2.0 = -4.0\text{ cm}\). The image is real, inverted, and enlarged to \(4.0\text{ cm}\).
Important Questions and Answers
Question 1: Where should an object be placed in front of a convex lens to get a real image of the same size as the object?
Answer: To obtain a real and inverted image of the exact same size as the object using a convex lens, the object must be placed at twice the focal length (\(2F_1\)) in front of the lens. The image is formed at \(2F_2\) on the opposite side of the lens.
Question 2: A spherical mirror and a thin spherical lens each have a focal length of \(-15\text{ cm}\). What types of mirror and lens are they likely to be?
Answer: According to the New Cartesian Sign Convention, a concave mirror has a negative focal length (because its focus lies in front of the mirror to the left), and a concave lens also has a negative focal length (because parallel rays diverge from the focus on the left side). Therefore, both the mirror and the lens are concave.
Question 3: The magnification produced by a plane mirror is \(+1\). What does this mean?
Answer: The magnification \(m = +1\) conveys two exact physical properties of the image formed by a plane mirror: the positive sign (\(+\)) indicates that the image is virtual and erect, while the numerical value \(1\) indicates that the height of the image is equal to the height of the object (\(h' = h\)).
Question 4: A doctor has prescribed a corrective lens of power \(+1.5\text{ D}\). Find the focal length of the lens. Is the prescribed lens diverging or converging?
Answer: Given power \(P = +1.5\text{ D}\). Using the relation \(f = \frac{1}{P}\):
\[f = \frac{1}{+1.5} = +\frac{2}{3}\text{ m} \approx +0.67\text{ m} = +66.67\text{ cm}\]
Since both the power and focal length are positive, the prescribed lens is a converging (convex) lens.
Question 5: Light enters from air to glass having refractive index \(1.50\). What is the speed of light in the glass? (Speed of light in vacuum is \(3 \times 10^8\text{ m/s}\).)
Answer: Using the formula for absolute refractive index \(n_m = \frac{c}{v}\):
\[1.50 = \frac{3 \times 10^8\text{ m/s}}{v} \implies v = \frac{3 \times 10^8}{1.50} = 2 \times 10^8\text{ m/s}\]
The speed of light in glass is \(2 \times 10^8\text{ m/s}\).
Chapter Summary
- Light travels in straight lines in a homogeneous medium, and its speed in vacuum is \(3 \times 10^8\text{ m/s}\).
- Reflection obeys two laws: \(\angle i = \angle r\), and the incident ray, reflected ray, and normal at the point of incidence lie in the same plane.
- For spherical mirrors of small aperture, the radius of curvature is twice the focal length: \(R = 2f\).
- Concave mirrors converge light and can form both real and virtual images; convex mirrors diverge light and always form virtual, erect, and diminished images, making them ideal for rear-view mirrors.
- The Mirror Formula is \(\frac{1}{v} + \frac{1}{u} = \frac{1}{f}\), and mirror magnification is \(m = \frac{h'}{h} = -\frac{v}{u}\).
- Refraction occurs because the speed of light changes when passing obliquely between transparent media. Light bends towards the normal when moving from an optically rarer to a denser medium and away from the normal when moving from denser to rarer.
- Snell's Law states that \(\frac{\sin i}{\sin r} = \text{constant} = n